ERIS SLM Firmware Update Enables Real 120 Hz Mode

An updated driver firmware for the ERIS Spatial Light Modulator offers a real 120 Hz operation mode. Compared to the method using 2 color channels sequentially to achieve frame rates above 60 Hz which still limits the input to 60 Hz, the refresh rates for both, input frames via the HDMI graphics interface and the output on the phase SLM display are boosted to 120 Hz. The driver enhancement further reduces the latency of the already fast and responsive ERIS SLM.

Switching between standard 60 Hz and 120 Hz mode can simply be done by configuring the HDMI graphics adapter to the relevant frame rate or by selecting the mode directly within the HOLOEYE SLM Software.

ERIS-1.1 Spatial Light Modulator:

Drive Scheme: Analog
Display Type: Reflective LCOS (Phase Only)
Resolution: 1920 x 1200 Pixel
Pixel Pitch: 8 µm
Fill Factor: >95 %
Active Area / Diagonal: 15.42 x 9.66 mm (0.717” Diagonal)
Phase Levels: 256 (8-bit) or 1024 (10-bit)
Input Frame Rate: 60 Hz / 120 Hz

Similar News

July 24, 2024

GAEA-2.1 Driver Update Enables Color Sequential Mode

We recently released a firmaware update for the GAEA-2 Spatial Light Modulator. With…

July 1, 2024

Update of Pattern Generator Software (Version 5.3)

An updated version of the HOLOEYE SLM Pattern Generator software is available…

January 30, 2024

15 New Standard Diffractive Optical Elements Added

We just released 15 new of off-the-shelf standard glass diffractive optical elements. These…

January 26, 2024

SLM Display SDK offers Simultaneous Operation of Multiple SLMs

With version 4.0 the SDK supports usage of multiple SLMs at the same…

January 25, 2024

HOLOEYE purchased significant part of Jasper Display Corporation’s LCOS technology portfolio

HOLOEYE has acquired assets from Jasper Display Corp’s (JDC) LCOS technology portfolio. JDC…

January 24, 2024