Author(s): Alexander Hirsch, Sven Krüger, Günther Wernicke, Hartmut Gruber, and Mathias Senoner

Abstract:

“An optimization procedure for the optical implementation of correlation filters (CFs) in an optical-hybrid frequency plane correlator is presented. Our approach is based on mapping of the given calculated CF values to the values constrained by the available spatial light modulator (SLM) device to achieve the maximum intensity of the output correlation peak. The optimization is provided for the implementation of the CFs using a Sanyo liquid crystal display (SLCD). The commercially available SLCDs are characterized by the phase modulation curves that are (1) nonlinear, (2) of a smaller total phase change interval than desired (0,2 pi) interval, and (3) significantly disturbed by the coupled amplitude variations. For such a case, the optimization achieved by varying a phase shift parameter is explained theoretically, demonstrated numerically, and confirmed experimentally.”

Link to Publications Page

Publication: SPIE Optical Engineering, (subscription required)

Issue/Year/DOI: Opt. Eng., Vol. 38, 1058 (1999);
DOI:10.1117/1.602150