Foveated near-eye display using computational holography

Author(s):

Cem, Ali; Hedili, M. Kivanc; Ulusoy, Erdem & Urey, Hakan

Abstract:

“Holographic display is the only technology that can offer true 3D with all the required depth cues. Holographic head-worn displays (HWD) can provide continuous depth planes with the correct stereoscopic disparity for a comfortable 3D experience. Existing HWD approaches have small field-of-view (FOV) and small exit pupil size, which are limited by the spatial light modulator (SLM). Conventional holographic HWDs are limited to about 20° × 11° FOV using a 4 K SLM panel and have fixed FOV. We present a new optical architecture that can overcome those limitations and substantially extend the FOV supported by the SLM. Our architecture, which does not contain any moving parts, automatically follows the gaze of the viewer’s pupil. Moreover, it mimics human vision by providing varying resolution across the FOV resulting in better utilization of the available space-bandwidth product of the SLM. We propose a system that can provide 28° × 28° instantaneous FOV within an extended FOV (the field of view that is covered by steering the instantaneous FOV in space) of 60° × 40° using a 4 K SLM, effectively providing a total enhancement of > 3 × in instantaneous FOV area, > 10 × in extended FOV area and the space-bandwidth product. We demonstrated 20° × 20° instantaneous FOV and 40° × 20° extended FOV in the experiments.”

Link to Publications Page

Publication: Scientific Reports
Issue/Year: Scientific Reports, Volume 10; Number 1; 2020
DOI: 10.1038/s41598-020-71986-9

Maskless lithography for versatile and low cost fabrication of polymer based micro optical structures

Author(s):

Muhammad Shaukat Khan, Roland lachmayer, and Bernhard Roth

Abstract:

“For applications in optical communication, sensing or information projection in automotive lighting, polymer based optical devices are of keen interest. Optical structures such as waveguides and gratings are basic blocks for these devices. We report on a simple, versatile, and yet low-cost fabrication method suited for both binary and multilevel diffractive microstructures as well as multimode optical waveguides in polymers. The fabrication of the diffractive structures, i.e. gratings, with two and multiple levels, is achieved by using a maskless optical lithography system employing a spatial light modulator. With the same system, waveguide cladding structures are realized by stitching of multiple single exposure patterns. For replication of these structures on polymer, e.g. polymethyl methacrylate (PMMA), a lab-made hot embossing machine is used. We then employ UV curable material and doctor blading to realize the waveguide cores. The created diffractive and waveguide structures are characterized in terms of diffraction efficiency and optical propagation loss, respectively, showing good optical quality and performance. With our fabrication system we have demonstrated a diffraction efficiency of 71% for multilevel grating structure and a propagation loss for stitched waveguides of 2.07 dB/cm at a wavelength of 638 nm. These basic elements will be employed to realize entire optical measurement systems for applications in sensing and integrated photonics in the next step.”

Link to Publications Page

Publication: OSA Continuum
Issue/Year: OSA Continuum, Volume 3; Number 10; Pages 2808; 2020
DOI: 10.1364/osac.400056