Experimental optical trapping of micro-particles with Frozen Waves

Author(s):

Rafael A. B. Suarez and Antonio A. R. Neves and Marcos R. R. Gesualdi and Leonardo A. Ambrosio and Michel Zamboni-Rached

Abstract:

“This work presents the first optical trapping experimental demonstration of micro-particles with Frozen Waves. Frozen Waves are an efficient method to model longitudinally the intensity of non-diffracting beams obtained by superposing co-propagating Bessel beams with the same frequency and order. The experimental setup of a holographic optical tweezers using spatial light modulators has been assembled and optimized. We investigate the optical force distribution acting on micro-particles of two types of Frozen Waves.The results show that it is possible to obtain greater stability for optical trapping using Frozen Waves. The significant enhancement in trapping geometry from this approach shows promising applications for optical tweezers, micro-manipulations over a broad range. ”

Link to Publications Page

Publication: Optics Letters
Issue/Year/DOI: Vol. 45, Issue 9, pp. 2514-2517
DOI: 10.1364/OL.390909

Amplitude-phase optimized long depth of focus femtosecond axilens beam for single-exposure fabrication of high-aspect-ratio microstructures

Author(s):

Deng Pan, Bing Xu, Shunli Liu, Jiawen Li, Yanlei Hu, Dong Wu, and Jiaru Chu

Abstract:

“Fabrication of high-aspect-ratio (HAR) micro/nanostructures by two-photon polymerization (TPP) has become a hot topic because of the advantages of ultra-high resolution and true 3D printing ability. However, the low efficiency caused by point-by-point scanning strategy limits its application. In this Letter, we propose a strategy for the rapid fabrication of HAR microstructures by combining TPP with an amplitude-phase optimized long depth of focus laser beam (LDFB). The optimization of the LDFB is implemented by modulating the amplitude and phase on a phase-only spatial light modulator, which can suppress the side lobe and smooth energy oscillations effectively. The LDFB is used for rapid fabrication of HAR micropillars and various microstructures, which greatly increases the fabrication efficiency. As a demonstration, several typical HAR microstructures such as assemblies, microchannels, microtubes, and cell scaffolds are prepared. Moreover, the microcapture arrays are rapidly fabricated for the capture of microspheres and the formation of microlens arrays, which show focusing and imaging ability.”

Link to Publications Page

Publication: Optics Letters
Issue/Year/DOI: Vol. 45, Issue 9, pp. 2584-2587 (2020)
DOI: 10.1364/OL.389946